Forum Rule: Always post complete source code & details to reproduce any issue!

Search:

Type: Posts; User: strud

Search: Search took 0.00 seconds.

  1. Maybe have a look at this ...

    Maybe have a look at this https://www.ftdichip.com/old2020/Support/Utilities.htm#ESD4

    You would need to use one of the EVE displays, but you can interface to these easily it seems.
  2. Hi Paul, Tried that and there was an...

    Hi Paul,

    Tried that and there was an improvement for my standard DAQ capture from 856kB/s up to 1018kB/s.

    Interested to know if others are getting USB MSC file write speeds higher than this...
  3. Hi defragster, will continue to search, nothing...

    Hi defragster, will continue to search, nothing found yet.

    Any pointers on where to look for the USB host write buffer settings?

    So some more data about the speed difference with a more...
  4. USBhost MSC throughput much lower than SD card on T4.1

    Hi All,

    I've been working on a DAQ system using the T4.1 and a nice 24bit ADC from TI.

    Just recently I've added the USB host MSC library to enable writing my captured and converted data to...
  5. Thanks Paul, will give that a go.

    Thanks Paul, will give that a go.
  6. Teensy 4.1 Serial port dissappears with out of range EXTEM definition

    I've been working on a data logger project of late which uses an external 24 bit ADC connected by SPI and writing this to the QSPI connected RAM that can be added to the Teensy 4.1.

    This was going...
  7. 26656 Very odd to see that the outgoing ping...

    26656

    Very odd to see that the outgoing ping message has "(no response found!) " within it.....
  8. Teensy 4.1 Ethernet - ping response not making it all the way back

    Hi All,

    I've finally begun my Teensy 4.1 experience with ethernet. I have assembled the PJRC hardware and connected up to by trusty laptop and loaded the example from Paul via the Arduino IDE (had...
Results 1 to 8 of 8