Forum Rule: Always post complete source code & details to reproduce any issue!

Search:

Type: Posts; User: chris_daquino

Search: Search took 0.00 seconds.

  1. Replies
    5
    Views
    297

    I've tested the pins with outputs and inputs and...

    I've tested the pins with outputs and inputs and they seem to be ok. Sorry, you are right, I have done the voltage divider in the canrx and cantz, and not canh and canl. But it is still not working....
  2. Replies
    5
    Views
    297

    The pins on the Teensy 3.6 seems to be OK. I have...

    The pins on the Teensy 3.6 seems to be OK. I have tried adding a voltage divider on the CANH and CANL on the Teensy 3.6 with no results. The 120R resistor is already implemented as part of the...
  3. Replies
    5
    Views
    297

    Teensy 3.2 and 3.6 CAN BUS

    Hi,

    I'm trying to make a Teensy 3.2 (transmitter) and a Teensy 3.6 (receiver) communicate through CAN using these cheap MCP2551...
  4. I need to do some further testing on a real...

    I need to do some further testing on a real practical situation but it only takes 10 microseconds to initialize the SerialFlash (SeriaFlash.begin()), so initializing the Flash chip everytime I'm...
  5. Drum samples are 2-3 seconds long and are...

    Drum samples are 2-3 seconds long and are continously accessed by the processor. I need at least a 12 sounds polyphony and I can achieve way more than that with a flash chip. A class 10 SD card is...
  6. AudioPlaySerialflashRaw and Multiple Flash Chips

    Hi,
    I am building a Drum Module and I have a large list of samples that I need to store on the Flash Memory. Since I already have a few S25FL512S available I am planning on using them but I would...
Results 1 to 6 of 6