Best LCD to be used witn Teensy 3.2

I would like some opinions and guidance for LCD's to be used with the Teensy. What are the easiest to implement, most versatile, etc.

Currently I have hooked up a 128x64 LCD with only 4 pins, no resistors or pot required. Looks good, but may be a bit smaller than I want. it's only the .96 inch. But it works well.

I have read that the 1602 can be used but requires some 1k resistors and a 10k pot to adjust the LCD.

Any suggestions and/or links to read up are would be helpful.

Thanks..

Chris

Color or monochrome? SPI or i2c? PJRC carries a 2.2 and 2.8" TFT with TOUCH that is very well supported in 240x320 pixels.

I used a 1.44" 128x128 ILI9163C from Ebay that was nice and fast

defragster said:

Color or monochrome? SPI or i2c? PJRC carries a 2.2 and 2.8" TFT with TOUCH that is very well supported in 240x320 pixels.

I used a 1.44" 128x128 ILI9163C from Ebay that was nice and fast

Click to expand...

Monochrome is fine, but something like cyan on black or white on black. I currently have one of these hooked up and it works well, very fast.

HERE