Hey everyone,
Hopefully this is a quick question (sorry if it's also a stupid question).
I got my first 3.2 working with quad-channel output last week, and I'm looking to wire up my 3.6 to do the same. I saw a number of threads confirming that the 3.6 / 3.2 were fully compatible, and judging by the pinouts found here: https://www.pjrc.com/teensy/pinout.html , it seems like the only change to this guide that has been referenced: https://www.sparkfun.com/news/2055 would be to connect the inner pad near pin 15 on the channel 3 & 4 board to pin 18 (SDA1) on the teensy 3.6.
Just wanted to check my understanding before I go ahead and modify another two audio adapters. I'd appreciate any insight.
Thanks a ton.
Hopefully this is a quick question (sorry if it's also a stupid question).
I got my first 3.2 working with quad-channel output last week, and I'm looking to wire up my 3.6 to do the same. I saw a number of threads confirming that the 3.6 / 3.2 were fully compatible, and judging by the pinouts found here: https://www.pjrc.com/teensy/pinout.html , it seems like the only change to this guide that has been referenced: https://www.sparkfun.com/news/2055 would be to connect the inner pad near pin 15 on the channel 3 & 4 board to pin 18 (SDA1) on the teensy 3.6.
Just wanted to check my understanding before I go ahead and modify another two audio adapters. I'd appreciate any insight.
Thanks a ton.