Hello,
I am considering building a fader box for MIDI control around a Teensy 3.2.
However I don’t know which fader brand/model to choose, starting with the value of the resistance, especially if I am to use the Teensy’s pullups.
Requirements:
- 100mm length;
- linear curve;
- low profile (the faderbox will be standing in front of a lying touchscreen);
- clean output (to use the ADCs with as much resolution as possible);
- edit: low consumption (I need the board to power 11 faders).
Thank you in advance for helping.
I am considering building a fader box for MIDI control around a Teensy 3.2.
However I don’t know which fader brand/model to choose, starting with the value of the resistance, especially if I am to use the Teensy’s pullups.
Requirements:
- 100mm length;
- linear curve;
- low profile (the faderbox will be standing in front of a lying touchscreen);
- clean output (to use the ADCs with as much resolution as possible);
- edit: low consumption (I need the board to power 11 faders).
Thank you in advance for helping.