plumped
Member
Hey guys
after 3 days of testing and trial and error, I decided to address the public.
I have a self-made LED matrix with WS2812B LEDs 16x16 which work without problems under Arduino (Uno as well as Nano). With the Teensy I simply can't get the whole thing working. I have a random flickering on the strips, not the simplest codes seem to work.
I have so far the following libraries through and am with the nerves at the end:
- FastLED
- WS2812Serial
- WS2812
- octows2811
NOTHING seems to work here .... any idea or a simple code snipped which is running on your side with the Teensy 4.1 + WS2812B
I am a total beginner with teensy. Therefore it would be very helpful if someone could send me a codesnipped which works in the constellation 4.1 + WS2812B
Thanks for your help!!
after 3 days of testing and trial and error, I decided to address the public.
I have a self-made LED matrix with WS2812B LEDs 16x16 which work without problems under Arduino (Uno as well as Nano). With the Teensy I simply can't get the whole thing working. I have a random flickering on the strips, not the simplest codes seem to work.
I have so far the following libraries through and am with the nerves at the end:
- FastLED
- WS2812Serial
- WS2812
- octows2811
NOTHING seems to work here .... any idea or a simple code snipped which is running on your side with the Teensy 4.1 + WS2812B
I am a total beginner with teensy. Therefore it would be very helpful if someone could send me a codesnipped which works in the constellation 4.1 + WS2812B
Thanks for your help!!