As seen it stated in a lot of threads that the MQS uses pin 10 and pin 12 , which is used by the default SPI.
I've tried moving to the alternative SPI pins 26,27,38,39 , with the define the lot. ILI9341_t3 tft = ILI9341_t3( TFT_CS , TFT_DC, TFT_RST, TFT_MOSI, TFT_SCLK, TFT_MISO );
But it still uses the default pins , and only CS and DC makes any difference.
I think the library was made for the Teensy 3x , so thinks my pins aren't valid ?
What do I need to do to move SPI or the MQS pins ? OR is there a Library I should be using on the Teensy 4.1 with the ILI9341 display ?
Thanks in advance Peter
I've tried moving to the alternative SPI pins 26,27,38,39 , with the define the lot. ILI9341_t3 tft = ILI9341_t3( TFT_CS , TFT_DC, TFT_RST, TFT_MOSI, TFT_SCLK, TFT_MISO );
But it still uses the default pins , and only CS and DC makes any difference.
I think the library was made for the Teensy 3x , so thinks my pins aren't valid ?
What do I need to do to move SPI or the MQS pins ? OR is there a Library I should be using on the Teensy 4.1 with the ILI9341 display ?
Thanks in advance Peter