nameless__
Member
Hello,
I'm currently planing the following project:
I want a device with storage in it, on the storage there is a .exe-file and lots of free space. When I plug it in, the .exe should be executed and the .exe will write on the free space.
To get more precise, I'm planning to use a teensy and put a sd card adapter on it, put in a sd-card, put the .exe on the sd card, and program the Teensy to open cmd, move to the sd-card path, open the exe and print a success prompt when finished.
Little Edit: Didn't play around with Teensy for some time, I see it right, that Teensy 3.6 has the SD-Card capability on board already? Anyway, same question, if thats working..
If that's possible I'd have a few questions on this but first, I wanted to ask, if I'm on the right path or if that's not possible. Didn't find an example, where the user in front of the computer plugged in the teensy and just accessed files on explorer, is that even possible?
If that's not possible, would it be an alternative to use 3 parts for the project: a teensy, a usb hub and a normal usb mass storage, but the teensy and the mass storage on the hub and just access the mass storage then? If yes, could I guarantee the mass storage to always get the same drive letter? (otherwise I can't switch to it in the console, can I)?
Thanks for the help in advance.
Kind regards,
nameless__
I'm currently planing the following project:
I want a device with storage in it, on the storage there is a .exe-file and lots of free space. When I plug it in, the .exe should be executed and the .exe will write on the free space.
To get more precise, I'm planning to use a teensy and put a sd card adapter on it, put in a sd-card, put the .exe on the sd card, and program the Teensy to open cmd, move to the sd-card path, open the exe and print a success prompt when finished.
Little Edit: Didn't play around with Teensy for some time, I see it right, that Teensy 3.6 has the SD-Card capability on board already? Anyway, same question, if thats working..
If that's possible I'd have a few questions on this but first, I wanted to ask, if I'm on the right path or if that's not possible. Didn't find an example, where the user in front of the computer plugged in the teensy and just accessed files on explorer, is that even possible?
If that's not possible, would it be an alternative to use 3 parts for the project: a teensy, a usb hub and a normal usb mass storage, but the teensy and the mass storage on the hub and just access the mass storage then? If yes, could I guarantee the mass storage to always get the same drive letter? (otherwise I can't switch to it in the console, can I)?
Thanks for the help in advance.
Kind regards,
nameless__
Last edited: