Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: Teensy 3.0 brand new and loader program

  1. #1
    washburn_it
    Guest

    Teensy 3.0 brand new and loader program

    Hi,

    this is my first post here.
    Today I've received the Teensy 3.0, I connected it to the USB port of my pc and the led started to blink slowly (so everything seems working), Windows detected the new hardware but, of course, it didn't configure it.

    Then I downloaded the loader program (Windows version), I followed the guide on the website but even though the Teensy is connected and I pressed the small button, the loader opens but the menu item "program" remains disabled and the only available option is "Auto Mode".
    I selected the "blink_fast" HEX file, but "program" is still disabled.
    I tried to turn off the computer but that didn't fix the problem.
    I tried several times to disconnect and reconnect the Teensy but even though I press the button (and the led stop blinking) the "program" menu item remains disabled.
    My pc is a i7 Asus Mainboard with Windows 7 Ultimate 64 bit.
    What's wrong?
    Thank you, regards.

    Roberto

  2. #2
    Senior Member
    Join Date
    Nov 2012
    Posts
    1,311
    If this is your first use of Teensy did you install the Serial Installer?
    For first-time use on Windows, the Serial Installer is needed.

    http://www.pjrc.com/teensy/serial_install.exe
    http://www.pjrc.com/teensy/windows8.txt
    Pete

  3. #3
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    21,815
    You need to use the beta 10 software.

    http://forum.pjrc.com/threads/14535-...eta10-Software

    On every page where you can download the old software (which doesn't support 3.0), there's a note about needing to use this newer beta version. Yes, it's not ideal.

  4. #4
    washburn_it
    Guest
    Thanks.
    I installed the file that you suggested but to me something is not clear yet.
    My experience with microcontrollers is with ATMega8/16/32 and AVR Studio 5 as IDE to develop my firmwares.
    If possible, how could I "send" the program to the Teensy 3 from AVR Studio 5?
    Last edited by washburn_it; 01-11-2013 at 05:46 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •