Hello.
i'm upgrading my arduino environment to latest version and im running into some issues.
i have one teensy 2.0 board with the WIZ812 adapter board and the wiz ethernet module.
if i use arduino 1.0.0 and compile my project ethernet access works, the program can get dhcp address and so on.
but if i compile the same project with arduino 1.0.1 or 1.0.3 (teensyduino is applied to all 3 of my versions of arduino) ethernet doesnt work.
even the simple samples like DhcpAddressPrinter fails to get any dhcp respons.
i have also checked with wireshark on the same subnet and no dhcp broadcasts is sent out when it is compiled under arduino 1.0.1 or 1.0.3
any idea whats wrong or advice for troubleshooting this?
clearly the hardware setup is working since 1.0.0 of arduino works.
i'm upgrading my arduino environment to latest version and im running into some issues.
i have one teensy 2.0 board with the WIZ812 adapter board and the wiz ethernet module.
if i use arduino 1.0.0 and compile my project ethernet access works, the program can get dhcp address and so on.
but if i compile the same project with arduino 1.0.1 or 1.0.3 (teensyduino is applied to all 3 of my versions of arduino) ethernet doesnt work.
even the simple samples like DhcpAddressPrinter fails to get any dhcp respons.
i have also checked with wireshark on the same subnet and no dhcp broadcasts is sent out when it is compiled under arduino 1.0.1 or 1.0.3
any idea whats wrong or advice for troubleshooting this?
clearly the hardware setup is working since 1.0.0 of arduino works.