Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 5 of 5

Thread: May be pushing it too far. Using the Teensy as a HDMI, touch to usb converter?

  1. #1
    Junior Member
    Join Date
    Jan 2013
    Posts
    7

    May be pushing it too far. Using the Teensy as a HDMI, touch to usb converter?

    So i guess be for even getting into the project I have to ask some preliminary questions.

    Can either the Teensy 2, 2++, or 3(preferred) support one of the following TFT LCD modules

    If so, here is the idea.

    Im looking to use one or two teensy's for this project.
    1. With one teensy i would like to turn the TFT LCD into a screen that will support HDMI(preferred)/DVI/VGA support
    2. The other teensy would allow the touch screen to be interfaced with a usb cord.

    Possible or not?

  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    26,777
    This is probably beyond the capability of any Teensy board.

  3. #3
    If you are just passing on the HDMI signal you could consider using a.....monitor, and then focus on the touch part. http://www.ebay.com/itm/Elo-Touch-In...item460c3f5f72

  4. #4
    Junior Member
    Join Date
    Jan 2013
    Posts
    7
    @ PaulStoffregen - well that sucks

    @cheapB - i've looked at those screens before and its just to big for my use.

  5. #5
    Quote Originally Posted by Swift Curse View Post

    @cheapB - i've looked at those screens before and its just to big for my use.
    If you can live with VGA instead of HDMI there are options using exactly the size and resolution you mentioned in the first post. This being a candidate: http://www.ebay.com/itm/LILLIPUT-COL...item4ac0e28113
    but I am sure there are more.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •