Pads/Pins on back of Teensy 3.1

[richardln2]

Sorry if this has been asked/answered before (tried searching on some common terms w/o luck).

The pads on the back of the Teensy 3.x (A12/A13, 25->33, etc) appear to have a silk screen that outlines these pins. Is there a standard smd pins or socket device that fits this 14x2 location that would allow me access to those pins? I would like to plug the teensy into a shield of my own design and still access those pins. just wondering if there was a pins/socket device in mind when those pads were brought out.

Thanx

[MichaelMeissner]

I don't know the name of the header pins included, but the Teensy 3.0/3.1 breakout board includes a 2x7 SMT male header for their shield: https://www.tindie.com/products/logl...y-31-breakout/

[Headroom]

I believe this has been discussed here before.
Follow this LINK

[richardln2]

Thanks, that's exactly what I was looking for.