Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: Pads/Pins on back of Teensy 3.1

  1. #1
    Junior Member
    Join Date
    Jan 2014
    Posts
    2

    Pads/Pins on back of Teensy 3.1

    Sorry if this has been asked/answered before (tried searching on some common terms w/o luck).

    The pads on the back of the Teensy 3.x (A12/A13, 25->33, etc) appear to have a silk screen that outlines these pins. Is there a standard smd pins or socket device that fits this 14x2 location that would allow me access to those pins? I would like to plug the teensy into a shield of my own design and still access those pins. just wondering if there was a pins/socket device in mind when those pads were brought out.

    Thanx

  2. #2
    Senior Member+ MichaelMeissner's Avatar
    Join Date
    Nov 2012
    Location
    Ayer Massachussetts
    Posts
    3,887
    I don't know the name of the header pins included, but the Teensy 3.0/3.1 breakout board includes a 2x7 SMT male header for their shield: https://www.tindie.com/products/logl...y-31-breakout/

  3. #3
    Senior Member
    Join Date
    Jan 2013
    Posts
    966
    I believe this has been discussed here before.
    Follow this LINK

  4. #4
    Junior Member
    Join Date
    Jan 2014
    Posts
    2
    Thanks, that's exactly what I was looking for.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •