u8glib - Universal Graphics Library for displays

Status
Not open for further replies.
I'v used it, pretty well done! Only on arduinos with several lcd controllers and simply works: I will test on Teensy3 next week, have some 3.3v display from ebay arriving...
 
mmm... fast looking inside utility folder of library showed a lot of code AVR specified, prolly it can work but not optimized as should be. It compile without errors with teensy btw.
 
I have a teensy ++2.0 and one of the blue 128x62 PJRC glcd displays. I used the pin assignements from the KS0108/glcd lib to hook up the display to the teensy. Downloaded and installed the u8glib. In each example program you have to set the pin numbers. After setting the pin numbers the GraphicsTest program worked fine.
 
Status
Not open for further replies.
Back
Top