Hi, all--
I'd like to use Teensy 3 with a battery pack and want to check my assumptions before doing anything. I have previously modified a Teensy 2.0 per Paul's instructions here using the example with 2 diodes and a battery pack, and I'd like to replicate that here. It appears that the 2 pads on the underside of Teensy 3, next to the USB socket, are where I would cut the trace and put the diode. Is that right? Anything else to do other than putting a second diode inline with the battery?
To clarify: this is going to be powered by 2xAA stepped up to 3.3V with this. The on-board rectifier serves as the diode on the battery lead. This is what I'm using for my Teensy 2.0 project and it works great!
Thanks!
I'd like to use Teensy 3 with a battery pack and want to check my assumptions before doing anything. I have previously modified a Teensy 2.0 per Paul's instructions here using the example with 2 diodes and a battery pack, and I'd like to replicate that here. It appears that the 2 pads on the underside of Teensy 3, next to the USB socket, are where I would cut the trace and put the diode. Is that right? Anything else to do other than putting a second diode inline with the battery?
To clarify: this is going to be powered by 2xAA stepped up to 3.3V with this. The on-board rectifier serves as the diode on the battery lead. This is what I'm using for my Teensy 2.0 project and it works great!
Thanks!
Last edited: