The problem that I am having is that when I try to run a simple program like "HelloWorld" in the Arduino IDE, it displays 'Serial port COM 27' not found. So I check my Device Manager and the teensy is showing up as "Unknown Device". So it must be a missing driver. I rerun teensyduino.exe and it says "USB Serial driver is installed". I also installed the Windows Serial Installer and it says it is already installed. As a last effort I uninstalled all of the arduino and teensy applications and tried to start over. Same result as before...
So any ideas?
Also I am able to load a program fine. I tested this with the blinking program among others.
Specs:
Teensy++2.0
Windows 7 x64
Arduino 1.0.4
(please let me know if any other information would be helpful)
Any pointers are greatly appreciated! Thanks in advanced!
(EDIT: I also installed everything on a different computer and the serial monitor worked fine, so it must be something wrong with the computer but I'm not sure where to look)
So any ideas?
Also I am able to load a program fine. I tested this with the blinking program among others.
Specs:
Teensy++2.0
Windows 7 x64
Arduino 1.0.4
(please let me know if any other information would be helpful)
Any pointers are greatly appreciated! Thanks in advanced!
(EDIT: I also installed everything on a different computer and the serial monitor worked fine, so it must be something wrong with the computer but I'm not sure where to look)
Last edited: