Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Teensy 3.0 LiPo Battery Connector

  1. #1
    Junior Member
    Join Date
    Apr 2013
    Posts
    4

    Teensy 3.0 LiPo Battery Connector

    Hi,

    I am looking at placing a JST LiPo battery connector ( https://www.sparkfun.com/products/9749 ) on my Teensy 3.0. From this schematic ( http://www.pjrc.com/teensy/pinout.html ) I assume I would place it on Vin and AGND. Then would I be able to slide the SD adapter down and use jumpers to connect the adapter to the 3.3v and GND pins? Could someone double check that? Thanks.

    SD http://www.pjrc.com/teensy/sd_adaptor.html

  2. #2
    Senior Member Wozzy's Avatar
    Join Date
    Jan 2013
    Location
    Philadelphia, Pennsylvania USA
    Posts
    341
    The AGND is the ground for the A/D converter.
    You need the GND on the opposite edge.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •