Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Teensy2 simple usb_disk code sample (teensyduino or not)

  1. #1
    Junior Member
    Join Date
    Apr 2013
    Posts
    1

    Teensy2 simple usb_disk code sample (teensyduino or not)

    Hello,

    I plan to do a USBtoSPI bridge and so read as fast as possible (targeting 800MBytes/s) data coming from usb host computer to teensy2.

    I'm looking for a teensy2 simple usb_disk/read sample code (arduino compatible or not) and not finding some sketch anywhere.
    I can see some sample sketch in the arduino IDE for the other ones but nothing for mass storage USB.

    Nic

  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    22,996
    I do not really understand your project, so this answer may or may not really apply?

    USB mass storage is available for Teensy 2.0, in a limited form, from Teensyduino. Select "Disk" from Tools > USB Type.

    On Teensy 2.0, the flash memory is read-only. On Teensy++ 2.0 it's writable.

    On both, the sustained USB mass storage access speed is approx 500 kbytes/sec.

    The SPI on Teensy 2.0 has no FIFO or DMA, so it is very difficult to sustain high speeds while also using USB communication or doing any other tasks. I still have no idea what you're really trying to accomplish, so this may or may not be a problem?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •