Hello,
I am nearing the end of a project and I am getting so frustrated trying to get the BLUESmirf to work on my Teensy 3.0 Currently I have VCC-VCC, GND-GND, TX on the Bluesmirf to Pin 0 on the Teensy and Pin 1 on the Teensy to RX on the Bluesmirf.
I know that the Bluesmirf works because I tested it hooked up this way to an arduino uno and it worked no problem. Also, I have tried connecting RTS to CTS, and tried not connecting. The bluesmirf does connect to my computer, but I cannot control the Teensy from MAX as I can with the Uno. I have firmata installed on the Teensy and when I use Firmata test, nothing shows up. Any help would be greatly appreciated.
I am nearing the end of a project and I am getting so frustrated trying to get the BLUESmirf to work on my Teensy 3.0 Currently I have VCC-VCC, GND-GND, TX on the Bluesmirf to Pin 0 on the Teensy and Pin 1 on the Teensy to RX on the Bluesmirf.
I know that the Bluesmirf works because I tested it hooked up this way to an arduino uno and it worked no problem. Also, I have tried connecting RTS to CTS, and tried not connecting. The bluesmirf does connect to my computer, but I cannot control the Teensy from MAX as I can with the Uno. I have firmata installed on the Teensy and when I use Firmata test, nothing shows up. Any help would be greatly appreciated.