mountaindonky
Member
Hello everyone,
I can not get the Teensy Loader application on any computer, tried on both Mac and PC, to recognize my Teensy 3. The Teensy reacts as expected however. Upon plugging the usb micro cable into the Teensy 3 the slow LED blink application launches. When I press the button on the Teensy 3 to load the HalfKay bootloader, the Teensy Loader application does not change from the "Press Button to Activate" image to the standard load image but the LED stops blinking.
I have looked at the Verbose Info and I see the following messages:
initialized, showing main window
HID/macos: attach callback
HID/macos: number of devices found = 1
HID/macos: vid=16C0, pid=0478, page=FF9C, usage=001D
HID/macos: none of the devices had known usage
Judging form this information, it appears as though the device is being detected. Does anyone have any insight into why the loader is not functioning as expected?
Thank you all!
I can not get the Teensy Loader application on any computer, tried on both Mac and PC, to recognize my Teensy 3. The Teensy reacts as expected however. Upon plugging the usb micro cable into the Teensy 3 the slow LED blink application launches. When I press the button on the Teensy 3 to load the HalfKay bootloader, the Teensy Loader application does not change from the "Press Button to Activate" image to the standard load image but the LED stops blinking.
I have looked at the Verbose Info and I see the following messages:
initialized, showing main window
HID/macos: attach callback
HID/macos: number of devices found = 1
HID/macos: vid=16C0, pid=0478, page=FF9C, usage=001D
HID/macos: none of the devices had known usage
Judging form this information, it appears as though the device is being detected. Does anyone have any insight into why the loader is not functioning as expected?
Thank you all!