Hey
I tried to connect my Teensy 3 on the RPi... however no device pops up on the RPi. Any hints how to resolve this? here are some details:
I tried to connect my Teensy 3 on the RPi... however no device pops up on the RPi. Any hints how to resolve this? here are some details:
Code:
uname:
Linux pixelmonster 3.6.11+ #538 PREEMPT Fri Aug 30 20:42:08 BST 2013 armv6l GNU/Linux
Dmesg:
[ 2.708902] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
[ 2.827502] usb 1-1.3: New USB device found, idVendor=16c0, idProduct=0483
[ 2.838701] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.843362] usb 1-1.3: Product: USB Serial
[ 2.847832] usb 1-1.3: Manufacturer: Teensyduino
[ 2.867479] usb 1-1.3: SerialNumber: 5788
lsusb -v:
Bus 001 Device 005: ID 16c0:0483 VOTI Teensyduino Serial
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x16c0 VOTI
idProduct 0x0483 Teensyduino Serial
bcdDevice 1.00
iManufacturer 1 Teensyduino
iProduct 2 USB Serial
iSerial 3 5788
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 67
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities 0x01
call management
bDataInterface 1
CDC ACM:
bmCapabilities 0x06
sends break
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 64
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)