kiddikiddi
Member
When using Teensy 2 ++ as a Usb midi device I have no problems.
I need to send Midi out to another device through the Midi port , I tried this schematic and code :
http://www.pjrc.com/teensy/td_libs_MIDI.html
I used an oscilloscope to see if there was a a signal from the TX pin (pin 3) but found no signal ...
When I use MIDI.sendNoteOn(note, 100, channel); nothing but usbMIDI.sendNoteOn(note, 100, channel); works fine.
Thank you
Brgds
Kristinn
I need to send Midi out to another device through the Midi port , I tried this schematic and code :
http://www.pjrc.com/teensy/td_libs_MIDI.html
I used an oscilloscope to see if there was a a signal from the TX pin (pin 3) but found no signal ...
When I use MIDI.sendNoteOn(note, 100, channel); nothing but usbMIDI.sendNoteOn(note, 100, channel); works fine.
Thank you
Brgds
Kristinn