Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: MCP1825 3.3V Regulator and Teensy++2.0 and 5volts

  1. #1
    Junior Member
    Join Date
    Jan 2013
    Location
    New Jersey USA
    Posts
    17

    MCP1825 3.3V Regulator and Teensy++2.0 and 5volts

    So I've got a Teensy++2.0 that I have been using with the MCP1825 3.3V regulator with power coming from USB. All is working well. But I have a need to run this particular teensy at 5Volts for a quick test on another project.
    Can I just jump the 5volt pad to the center pad? This will short the input and output pins of the regulator together. ANy ideas if this will cause a problem with the regulator?
    Thanks,
    Rich

  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    22,465
    This will cause problems. Do not do it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •