"Please press the RESET BUTTON on your Teensy to upload your sketch." is all get
Hello,
I got the Teensy 3.1 yesterday. The hardware looks nice and it worked well at the beginning.
BUT then while I was playing around with the I2Cdev library in combination with the MPU6050 the Mac crashed 2 times in 2 hours. Ok, this was happening with the Arduino in combination with Processing too some times.
(I hate this! But I don't know what the problem is...)
And then I ended up getting "Please press the RESET BUTTON on your Teensy to upload your sketch. Auto-reboot only works if the Teensy is running a previous sketch.". And nothing more. This is the reason for this post.
I tried EVERYTHING the internet gave me.
I'm using a MacBook Pro and a mac Mini (cause I read I should test another computer to solve this problem, but it didn't).
I tried to load the "blink" sketch. -> no chance, only the error occurs...
I tested holding down the button on the Teensy while plugging in the usb -> no result.
I testet the Mac mini -> no result.
I still get the 3.3v on the 3.3v pin and the 5v on the USB pin -> I guess I didn't killed the whole board!?
From what I understand, the problem is that the Teensy is confusing the mac over the serial connection (I guess I read something like that in this forum). SO is there a way to just force the Teensy back to a fabric state or something like that!?
Is there anything I can try or is the board dead and the one day journey with Teensy is over!?
I hope anyone has a solution!
Thanks in advance.
Hello,
I got the Teensy 3.1 yesterday. The hardware looks nice and it worked well at the beginning.
BUT then while I was playing around with the I2Cdev library in combination with the MPU6050 the Mac crashed 2 times in 2 hours. Ok, this was happening with the Arduino in combination with Processing too some times.
(I hate this! But I don't know what the problem is...)
And then I ended up getting "Please press the RESET BUTTON on your Teensy to upload your sketch. Auto-reboot only works if the Teensy is running a previous sketch.". And nothing more. This is the reason for this post.
I tried EVERYTHING the internet gave me.
I'm using a MacBook Pro and a mac Mini (cause I read I should test another computer to solve this problem, but it didn't).
I tried to load the "blink" sketch. -> no chance, only the error occurs...
I tested holding down the button on the Teensy while plugging in the usb -> no result.
I testet the Mac mini -> no result.
I still get the 3.3v on the 3.3v pin and the 5v on the USB pin -> I guess I didn't killed the whole board!?
From what I understand, the problem is that the Teensy is confusing the mac over the serial connection (I guess I read something like that in this forum). SO is there a way to just force the Teensy back to a fabric state or something like that!?
Is there anything I can try or is the board dead and the one day journey with Teensy is over!?
I hope anyone has a solution!
Thanks in advance.