adrian
Well-known member
I take the output of talkie straight from the teensy to my mixing desk and then out to my rack ... no reason why you couldn't feed it back into the teensy audio board as a line in signal ...of course if you don't have a mixing desk, you will have to match inputs and outputs.
A 10uf electrolytic cap on the hot line is a good idea, to remove dc offset.
Here is a picture of the teensy and cap goinginto my 'mobile' interface
A 10uf electrolytic cap on the hot line is a good idea, to remove dc offset.
Here is a picture of the teensy and cap goinginto my 'mobile' interface
Last edited: