Hi everyone,

I just jumped on the Teensy3.1 wagon by getting two, which I received yesterday. I went right to the getting started section on the PJRC website, installed the udev rules, and connected one up. Kubuntu 13.10 doesn't create any /dev/ttyA* or /dev/ttyU* device for the teensy3.1. Both teensy3.1 boards check out according to how the docs say they should be - running the blink led program at about 1 second. Both teensy3.1's go into halfkay mode when the button is pressed, and the teensy loader recognizes both of them.

Everything *seems* like it *should* be working in Linux, but it isn't. This Kubuntu 13.10 is a fresh installation, so it doesn't have more than the normal junk in it. I've had both teensy3.1's plugged direct into a USB port on my laptop.

Am I missing something obvious?

lsusb shows:
Bus 001 Device 006: ID 16c0:0486 Van Ooijen Technische Informatica Teensyduino RawHID
OR
Bus 001 Device 007: ID 16c0:0478 Van Ooijen Technische Informatica Teensy Halfkay Bootloader

At present, I don't see anything that clues me into what the problem might be, so ideas and feedback are appreciated.

8-Dale