Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 3 of 3

Thread: Teensy 3.0 and nRF24L01+ - Build error

  1. #1
    Junior Member
    Join Date
    Sep 2013
    Location
    SF Bay Area
    Posts
    17

    Teensy 3.0 and nRF24L01+ - Build error

    Anyone seeing this or have a suggestion?

    /var/folders/k6/w0wrbkrn4tz32phz5cl0syx0000fs7/T/build473021265770479809.tmp/WString.cpp.o -L/var/folders/k6/w0wrbkrn4tz32phz5cl0syx0000fs7/T/build473021265770479809.tmp -larm_cortexM4l_math -lm
    /Applications/Arduino105.app/Contents/Resources/Java/hardware/tools/arm-none-eabi/bin/../lib/gcc/arm-none-eabi/4.7.2/../../../../arm-none-eabi/bin/ld: section .progmem.data loaded at [000000000000ab3c,000000000000ab4d] overlaps section .data loaded at [000000000000ab3c,000000000000b17b]
    collect2: error: ld returned 1 exit status


    Mac OS 10.7.5
    Arduino 1.0.5, Teensyduino 1.18
    Building pingtest from dc740's RF24_teensy2_and_3.zip and pingpong test.zip mentioned in
    http://forum.pjrc.com/threads/24307-...and-Teensy-3-0


    Any suggestions appreciated.

  2. #2
    Junior Member
    Join Date
    Sep 2013
    Location
    SF Bay Area
    Posts
    17
    MORE info:

    Ahhh... but I select Teensy 2.0, it builds OK. (Of course, I only have a T3 and T3.1 board)

    But if 3.0 or 3.1 I get this failure.

  3. #3
    Junior Member
    Join Date
    Sep 2013
    Location
    SF Bay Area
    Posts
    17
    OK I see the thread related to this:

    http://forum.pjrc.com/threads/24570-...8104#post38104

    But there never seems to have been a solution.

    Last I saw, dc740 was going to go home and isolate the offending code and post those steps to repro, since Paul tried to repro it with the available info and found it unreproducible.

    But that still leaves, at least some of us, in the dark.

    Again.. any suggestions sincerely appreciated.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •