Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Exposed ground line a problem in teensy board bount?

  1. #1

    Exposed ground line a problem in teensy board bount?

    Hey guys - Im soldering my teensy and two multiplexers onto a board and wanted to make a ground line since there are so many parts of my circuit that get pulled to ground. Im using some 22 gauge copper wire for this but just realized the possibility of it acting as an antennae...do you think it will be ok?

    and if you advise against it - any alternatives?

    Click image for larger version. 

Name:	GroundlineTeensy.jpg 
Views:	81 
Size:	174.8 KB 
ID:	1584

  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    22,122
    This will probably be fine.

    If you're really concerned about picking up RF signals, run the signal wire along the same path as the ground wire, keeping the 2 wires as close as reasonably possible.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •