Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 5 of 5

Thread: Serial_install.exe and windows drivers

  1. #1
    Junior Member
    Join Date
    Dec 2013
    Posts
    1

    Serial_install.exe and windows drivers

    So a question regarding the INF driver install. It appears that you have a code signing certificate (based on the serial_install.exe), so why have you not signed the inf? I believe it would be as simple as generating a cat file for the inf and signing it.

    I seems that Pololu has done this for their inf only driver install that references usbser.sys. (this link might be useful http://www.davidegrayson.com/signing/ )

    Also just FYI, It is my understanding that unsigned drivers don't survive the upgrade process. (hence the threads here about the driver disappearing after upgrading to windows 8.1)

  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    23,084
    Thanks for that link.

    I had tried this before, but failed. Will try again.....

  3. #3
    Junior Member
    Join Date
    Feb 2014
    Posts
    2
    Quote Originally Posted by PaulStoffregen View Post
    Thanks for that link.

    I had tried this before, but failed. Will try again.....
    Have you made any progress with this?

    We at Solidoodle use your drivers for the printrboard, and have problems with the signing for users on Windows 8, and 8.1.
    If it's easy for us to hack around and generate the right file, we'd be happy to give it a shot. I'm sure you're busy.

  4. #4
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    23,084
    I've updated the stand alone serial installer.

  5. #5
    Junior Member
    Join Date
    Feb 2014
    Posts
    2
    Quote Originally Posted by PaulStoffregen View Post
    I've updated the stand alone serial installer.
    Thanks so much!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •