A person wants to use 3 quadrature encoders for volume controls and display the number of counts. As far as I Know you can only use one quadrature encoder at a time when the encoder is directly connected to a ARduino Uno board. Hence would it possible to use 3 directly coupled quadrature encoders with Teensy 3.0 or 3.1?
If not would it be possible to use 3 quadrature encoders with Teensy 3.0 or 3.1 if a converter like a LS7184 is used? A LS7184 converts the output of a quadrature encoder to a clock pulse and a direction signal. See:
>http://www.lsicsi.com/pdfs/Data_Sheets/LS7183_LS7184.pdf<
Howard
If not would it be possible to use 3 quadrature encoders with Teensy 3.0 or 3.1 if a converter like a LS7184 is used? A LS7184 converts the output of a quadrature encoder to a clock pulse and a direction signal. See:
>http://www.lsicsi.com/pdfs/Data_Sheets/LS7183_LS7184.pdf<
Howard