MichaelMeissner
Senior Member+
Freto, it looks like your board is live on tindie: https://www.tindie.com/products/freto/teensy-3-breakout-board-and-shield/
Yes, I'd have separate regulator as the 3.3V out from the Teensy3 is just 100mA (or so).
The 5V source could be other than the USB 5V feeding the Teensy.
USB is supposed to be 500mA per port but often it is not.
Freto, it looks like your board is live on tindie: https://www.tindie.com/products/freto/teensy-3-breakout-board-and-shield/
Yes I finally put it live, and was surprised with a few orders this morning
Congratulations! Always nice to get those first orders.
If you don't mind me asking, are you getting orders for bare boards, partly assembled, or fully assembled?
I've not gone through the process on OSH to upload design files, etc. The stuff I've ordered from them have been shared design files. Exactly what files need to be uploaded?Hi,
As I mentioned the complete design files are up on on github. I have not created shared projects up on OSHPark or Seedstudio but it is possible. So far I am not sure it saves you much. You can simply download the zip file with the gerber information from github and on both sites it will ask for a file, which the zip files are setup to handle for either of those two sites.
Kurt