I would like to check on the forum before i supply voltage to my teensy (i'd hate to burn it because i did not take the time to ask). I am building a RC transmitter with a teensy 3.1, the pulse position library and a hobby king radio send ppm to my plane and Xbee send serial data back to the radio. I can not supply the Xbee strait from pin 3 of the teensy because Xbees requires 200mA and pin 3 is rated to 100mA.
So I would like to make sure I understand the pin out of the teensy 3.1 before i do something stupid...
1 - Can I suply regulated 3.3V through pin 3 of the teensy?
2 - What is other 3.3V pin next to the Vbat on the small side of the teensy?
3 - What is Vbat?
Thank you for your help,
Francois
So I would like to make sure I understand the pin out of the teensy 3.1 before i do something stupid...
1 - Can I suply regulated 3.3V through pin 3 of the teensy?
2 - What is other 3.3V pin next to the Vbat on the small side of the teensy?
3 - What is Vbat?
Thank you for your help,
Francois