Windows 7 blue screen on shutdown

Status
Not open for further replies.
Thanks.

I will do these steps, one by one, because i'm going to restore the windows with a clean installation (without drivers and software), in order to know when the operation system crashes.

About the driver USB/COM, i use the official teensy "WINDOWS DRIVER INSTALLER" before connecting the teensy 3.1

https://www.pjrc.com/teensy/serial_install.exe

PS.I have seen this in last link

On Windows, this Windows Driver Installer is needed. On Vista or Windows 7, right click and choose "Run as administrator". After installation, Windows 7 will should work automatically. Windows XP and Vista will still show the New Hardware Wizard, but it will be able to find the driver with the default choices.

I will check it again. Installing it as administrator. (although the driver was recognized correctly without "Run as administrator")

--

PS. This is the fail detail

Firma con problemas:
Nombre del evento de problema: BlueScreen
Versión del sistema operativo: 6.1.7601.2.1.0.256.48
Id. de configuración regional: 3082

Información adicional del problema:
BCCode: fe
BCP1: 0000000000000004
BCP2: FFFFFA80074D5010
BCP3: FFFFFA80069E3620
BCP4: FFFFFA800AECAC30
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Archivos que ayudan a describir el problema:
C:\Windows\Minidump\080214-27674-01.dmp
C:\Users\CARLOS\AppData\Local\Temp\WER-40139-0.sysdata.xml

Lea nuestra declaración de privacidad en línea:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0c0a

Si la declaración de privacidad en línea no está disponible, lea la declaración de privacidad sin conexión:
C:\Windows\system32\es-ES\erofflps.txt

140802112959714562.jpg
 
Last edited:
I was one week by holidays. This week i'm going to update the BIOS, install Windows 7 64b, and step by step, check when the error appears.
 
Hi again guys

FINALLY SOLVED the BSOD blue screen

MY cumputer

Windows 7 64 bits (updated)
Gygabyte GA-P55-US3L (rev. 2.1)
1 AMD ASUS 290X OCII
1 i7 860
1 Power supply Enermax Platinum 600 W

-I have updated the BIOS (with last one)

http://es.gigabyte.com/products/page/mb/ga-p55-us3lrev_21/download/

-I have installed the new drivers of the mainboard from website (not from Original CD)

http://es.gigabyte.com/products/page/mb/ga-p55-us3lrev_21/download/

-In BIOS, i have change the ERP support to ENABLED in order to consume less than 1W.

ErP Support
Determines whether to let the system consume less than 1W power in S5 (shutdown) state. (Default: Disabled)
Note: When this item is set to Enabled, the following four functions will become unavailable:
PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.

990FXA-UD5_BIOSPM_01.jpg


-And very important, don't install the utility of mainboard called On/OFF CHARGE, because is for enabling the USB voltage when CPU is turned OFF.

http://www.giga-byte.es/global/es/pages/mb_on-off-charge/on-off-charge.htm
---

And now, when i shutdown or restart the windows 7 64b, everything is ok.

;)
 
Last edited:
Status
Not open for further replies.
Back
Top