Teensy3.1 loader not working

[siddharthdeore]

I by mistake uploaded 61 kb large hex file basically compiled for atmega2560 into my teensy3.1 now

im not able to download any coade to teensy

teensy. exe loader is detecting the board

hid is not showing in device manager

I tried to reinstall driver teensyduino and arduino

resstared my computer (running windoes8. 1)

halfkey not working

tried to work on other systems but teensy is dead and not detecting on any device...

is there any way to upload simple blink .hex file to board except teensy loader

I tried difrent versions of teensy loader and teensyduino

ans also tried every step in troubleshoot page of pjrc..

the last file I uploaded to teensy is actualy compiled for apm2.5 but by mistake I pressed the button and code is uploaded now teensy not working

please give me any other option to upload code into board or chaging the firmware

[PaulStoffregen]

Can you send me a copy of this .hex file? I'll give it a try on a Teensy 3.1 here.

[siddharthdeore]

Can you send me a copy of this .hex file? I'll give it a try on a Teensy 3.1 here.

This is .ino file i compiled for atmega2560

[siddharthdeore]

i am trying to attach .hex file but forum shows its invalid...

[siddharthdeore]

hex file attached on dropbox
https://www.dropbox.com/s/cg6aromens...ified.hex?dl=0

[siddharthdeore]

Can you send me a copy of this .hex file? I'll give it a try on a Teensy 3.1 here.

This is .ino file i compiled for atmega2560

[siddharthdeore]

Can you send me a copy of this .hex file? I'll give it a try on a Teensy 3.1 here.

Dear PaulStoffregen

I uploaded hex file have you tasted it please reply fast....

Thank you

[PaulStoffregen]

I tried it on a board here. It's doing very strange things.

Please email me directly, paul at pjrc dot com. Include a link to this thread in your email. We'll send you a replacement board, and I'd like to get this locked-up board back here for testing.

[siddharthdeore]

I tried it on a board here. It's doing very strange things.

Please email me directly, paul at pjrc dot com. Include a link to this thread in your email. We'll send you a replacement board, and I'd like to get this locked-up board back here for testing.

thank you sir I already sent an email....