teensy 3.1 pin mapping (A10-14)

[capricorn one]

Title pretty much says it...

I'm laying out my own board with the MK20DX256VLH7 chip with the MINI54 bootloaded chip for a project, and I want to use the A10-A14 pins on the microcontroller. A12-A14 pins are labeled on the schematic, but I can't figure out which ones are A10 and A11. I may be blind, but I've looked it over a few times now and just don't see it. I'm looking at this :

https://www.pjrc.com/teensy/schematic.html

Thank you!

[potatotron]

On the QFN they're on pins 9 & 10, on the schematic they're on the top right side below VUSB and a 2.2uF cap.

The attached shows the details.

Good luck!

[capricorn one]

I knew I missed it. Thank you!!!