Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 3 of 3

Thread: teensy 3.1 pin mapping (A10-14)

  1. #1
    Member capricorn one's Avatar
    Join Date
    Oct 2014
    Location
    Los Angeles
    Posts
    51

    teensy 3.1 pin mapping (A10-14)

    Title pretty much says it...

    I'm laying out my own board with the MK20DX256VLH7 chip with the MINI54 bootloaded chip for a project, and I want to use the A10-A14 pins on the microcontroller. A12-A14 pins are labeled on the schematic, but I can't figure out which ones are A10 and A11. I may be blind, but I've looked it over a few times now and just don't see it. I'm looking at this :

    https://www.pjrc.com/teensy/schematic.html

    Thank you!

  2. #2
    Senior Member
    Join Date
    Jun 2013
    Location
    Torrance CA
    Posts
    415
    On the QFN they're on pins 9 & 10, on the schematic they're on the top right side below VUSB and a 2.2uF cap.

    The attached shows the details.

    Good luck!


    Click image for larger version. 

Name:	Screen Shot 2014-11-12 at 7.37.05 PM.jpg 
Views:	1618 
Size:	91.3 KB 
ID:	2934

  3. #3
    Member capricorn one's Avatar
    Join Date
    Oct 2014
    Location
    Los Angeles
    Posts
    51
    I knew I missed it. Thank you!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •