RichardFerraro
Well-known member
I have worked with ten+ teensy 3.1's.
I wired in a new Teensy 3.1 and found it reporting a continuous analog voltage (from a pot across 0 and Vin) in jumps (regardless of the analog pin). It would read sort of continuously from 0-30 then jump to 60, 127, 255, 500, 1023 with no values in between.
Trying a different teensy 3.1 did not show this behavior.
Sparkfun is replacing the part and was curious if anyone experienced this?
thanks,
Richard
There is no program to speak of:
void setup() {
Serial.begin(115200); // console
}
void loop() {
short val = analogRead(A0);
Serial.println(val);
delay(100);
}
I wired in a new Teensy 3.1 and found it reporting a continuous analog voltage (from a pot across 0 and Vin) in jumps (regardless of the analog pin). It would read sort of continuously from 0-30 then jump to 60, 127, 255, 500, 1023 with no values in between.
Trying a different teensy 3.1 did not show this behavior.
Sparkfun is replacing the part and was curious if anyone experienced this?
thanks,
Richard
There is no program to speak of:
void setup() {
Serial.begin(115200); // console
}
void loop() {
short val = analogRead(A0);
Serial.println(val);
delay(100);
}