Chopsticks
Active member
Hi there!
I've started a new hobby project where I want to test different kind of accelerometers in combination with my teensy 3.1.
Now i've seen lots of guides of how to select a suitable accelerometer.
But i'm getting stuck on the sensitivity part.
I see different kind of notations, such as:
4096 counts/g
1 mg/LSB
740 - 860 mV/g
1 - 3,9 mg/digit
what does this all means? And what is important to know when choosing a very sensitive accelerometer. For example, is 1024 counts/g better or worse compared with 4096 counts/g. Or is 10 mg/LSB better/worse then 1,h/LSB etc.
Any kind of help is welcome! Would appreciate it.
greetings!
Chopsticks
I've started a new hobby project where I want to test different kind of accelerometers in combination with my teensy 3.1.
Now i've seen lots of guides of how to select a suitable accelerometer.
But i'm getting stuck on the sensitivity part.
I see different kind of notations, such as:
4096 counts/g
1 mg/LSB
740 - 860 mV/g
1 - 3,9 mg/digit
what does this all means? And what is important to know when choosing a very sensitive accelerometer. For example, is 1024 counts/g better or worse compared with 4096 counts/g. Or is 10 mg/LSB better/worse then 1,h/LSB etc.
Any kind of help is welcome! Would appreciate it.
greetings!
Chopsticks