I have a Teensy 3.1 and the audio board purchased from PJRC. Also connecting to an OLED graphics display. The display type is NHD-2.8-25664UCY2. I’m trying to make a hand held portable audio spectrum analyzer. Audio board was not connected at this time and was working on the display interface.
Things were going along nicely and I was making some progress. However, the communication between the Teensy board and the Teensy loader was erratic at times. I was unplugging and replugging the board from the computer’s USB port many times. Sometimes I had to restart the Arduino IDE. Sometimes I had to reboot the computer. After a while, the Teensy board was not recognized at all. I went to another computer with same result.
I then upgraded to the latest versions of Arduino IDE (1.6.4) and Teensy loader (1.2.3). Still, the board is not recognized by Windows. I’m using Windows 7 Professional.
Any help, comments, or suggestions would be most appreciated.
Things were going along nicely and I was making some progress. However, the communication between the Teensy board and the Teensy loader was erratic at times. I was unplugging and replugging the board from the computer’s USB port many times. Sometimes I had to restart the Arduino IDE. Sometimes I had to reboot the computer. After a while, the Teensy board was not recognized at all. I went to another computer with same result.
I then upgraded to the latest versions of Arduino IDE (1.6.4) and Teensy loader (1.2.3). Still, the board is not recognized by Windows. I’m using Windows 7 Professional.
Any help, comments, or suggestions would be most appreciated.