Hi all !
I'm using 2 MIDI/USB peripherals connected to 2 USB ports directly on the motherboard :
TEENSY 3.1 (used as as an expression pedal), and a separate MIDI->USB interface.
When I connect first the MIDI->USB interface, then after the TEENSY, all is OK.
But when I re-boot the system, (OpenSuse 13.1), TEENSY only is recognized by the system.
Similar problem occurs under WINDOWS XP SP3.
Hardware : Mini-Itx board, 4GO Ram, Intel D525MW.
It seems that TEENSY takes all the USB bandwidth, and the other USB peripheral is forgotten ?
Thanks for your help !
Pascal Leray
I'm using 2 MIDI/USB peripherals connected to 2 USB ports directly on the motherboard :
TEENSY 3.1 (used as as an expression pedal), and a separate MIDI->USB interface.
When I connect first the MIDI->USB interface, then after the TEENSY, all is OK.
But when I re-boot the system, (OpenSuse 13.1), TEENSY only is recognized by the system.
Similar problem occurs under WINDOWS XP SP3.
Hardware : Mini-Itx board, 4GO Ram, Intel D525MW.
It seems that TEENSY takes all the USB bandwidth, and the other USB peripheral is forgotten ?
Thanks for your help !
Pascal Leray