Teensy 3.1 - Use those extra "Dupont" wires and access Serial2

Status
Not open for further replies.
B

Blitter

Member
My current project maps every single pin on my Teensy 3.1. Of course, I still need another serial line (who doesn't?), so I grabbed a couple of extra "dupont" jumper wires and soldered them to the TX2/RX2 pads underneath.

I know those pads underneath are fragile, so I superglued the pin housings to the header insulators, to provide some strain relief

They work great.

19251691901_14cdb7cea9_n.jpg19060278488_789930abf6_n.jpg
 
Last edited:
I'd use 30gauge wirewrap wires leading to some junction connection for sturdier wires. Mounted on the T3 board somehow.
 
Status
Not open for further replies.
Back
Top