I was wondering if the Teensy is able to power two different devices through its 3.3 V pin.
The two devices are an amplifier (https://www.adafruit.com/products/1712) and a radio (http://www.hoperf.com/rf/fsk_module/RFM69W.htm).
After looking at the datasheets, the max current through a single pin on the Teensy is 25 mA, the amplifier's current draw is 3.5 mA, and the radio's current draw is 6 mA.
According to these specs, I believe the Teensy should be able to power both devices, but I am unsure.
The two devices are an amplifier (https://www.adafruit.com/products/1712) and a radio (http://www.hoperf.com/rf/fsk_module/RFM69W.htm).
After looking at the datasheets, the max current through a single pin on the Teensy is 25 mA, the amplifier's current draw is 3.5 mA, and the radio's current draw is 6 mA.
According to these specs, I believe the Teensy should be able to power both devices, but I am unsure.