In the SerialFlash library, the CopyFromSD example contains this:
When uncommented, and used with the Audio Board (shield), the SDChipSelect pin should be 10, and not 4.
Suggestion: Add a comment to notify the audio board users:
Code:
const int SDchipSelect = 4;
const int FlashChipSelect = 6;
void setup()
// uncomment these if using Teensy audio shield
// SPI.setSCK(14); // Audio shield has SCK on pin 14
// SPI.setMOSI(7); // Audio shield has MOSI on pin 7
When uncommented, and used with the Audio Board (shield), the SDChipSelect pin should be 10, and not 4.
Suggestion: Add a comment to notify the audio board users:
Code:
const int SDchipSelect = 4; // Audio Shield has SD card CS on pin 10
const int FlashChipSelect = 6;
void setup()
// uncomment these if using Teensy audio shield
// SPI.setSCK(14); // Audio shield has SCK on pin 14
// SPI.setMOSI(7); // Audio shield has MOSI on pin 7