Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Teensy 3.1 as USB midi interface and USB -> DMX converter

  1. #1

    Teensy 3.1 as USB midi interface and USB -> DMX converter

    Hi everyone,
    I use my teensy 3.1 as a midi controller and I am wondering if it is possible to use it also as a usb to open dmx interface.
    Is it possible to declare the teensy as a midi device AND a usbDMX device
    If it is not, maybe it is possible to declare it as a teensy to computer midi device and comuter to teensy openDMX interface ?
    thanks a lot !

  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    I'm not familiar with OpenDMX, but I did make a project a couple years ago which emulated a subset of the Entec DMX USB Pro (just enough for Vixen). It played a sequence stored on a SD card, but allowed any USB communication to stop the automatic playing and take control of the lights.

    Here is that code:

    Assuming OpenDMX also needs USB serial, and you want USB MIDI at the same time, perhaps these threads can help?

    If OpenDMX needs other USB support, maybe you could explain or link to the tech info....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts