Just a quick question, I couldn't see an answer for this in an easily accessible location:
On the Teensy 3.2 schematic, pin 4 of the USB Micro-AB connector is connected to PTA6 of the bootloader IC. If I intend to use a standard USB B connector on my PCB, what should I do with this pin which isn't present on 4-pin USB connections?
On the Teensy 3.2 schematic, pin 4 of the USB Micro-AB connector is connected to PTA6 of the bootloader IC. If I intend to use a standard USB B connector on my PCB, what should I do with this pin which isn't present on 4-pin USB connections?