Forum Rule: Always post complete source code & details to reproduce any issue!
-
Teensy3 Kicad libs
Does anyone have some footprints (either PCB and or schem) for the teensy 3.x's?
I'm specifically after a PCB footprint that breaks out the bottom side pins in the clever way described in a couple threads.
Thanks!
-
Senior Member+
-
Senior Member+
I link post #2 on the Coming Wiki list so they were all in one place. @MichaelM - are there other common OSH type boards that would be good to post? I got the PJRC Touch Display adapter for instance and Franks Memory board? I've not found a search on OSH - and forum search is tough even if you know what you are looking for.
-
There's a search on the Shared Projects page at OSHPark: https://oshpark.com/shared_projects
Currently 90 results searching for "Teensy".
-
Senior Member+
On OSH, go into Shared Projects, and there is a search bar. In my experience, it gets lost after about 3 pages of results, particularly if you click on links (though control-button1 and shift-button1 can help).
And then there is Onehorse, the one man design team: Tindie store for finised boards: https://www.tindie.com/stores/onehorse/. You can also order the raw pcb's from Onehorse's OSH page: https://oshpark.com/profiles/PeskyProducts.
Last edited by MichaelMeissner; 11-13-2015 at 11:50 PM.
-
Senior Member+
Search Bar shows on FireFox and EDGE, but not my IE with stuff disabled - so I never saw it before! @ecurtz - thanks for noticing my comment! Yes, going to the pages gets lost quickly!
-
In answer to the OP's question there are a number of Eagle libraries that can be found and converted using something like https://github.com/lachlanA/eagle-to-kicad. I am evaluating Kicad at work and will try to do some conversions next week and will let you know how things turn out.
-
Right, I know there are plenty of PCB's I can order but it's always good to have some more links.
I'll try out some of the eagle libs and convert to kicad - or just use one of the oshpark pcbs as a starting place, it's probably not much work either way I was just hoping someone might have done this already in kicad 
My interest is in putting a teensy on a PCB with other stuff there (vs just making a breakout board)
-
Started doing some work on building a kicad footprint and schematic symbol for the teensy 3x.
Is there anywhere I can find good measurements for the teensy3? I couldn't seem to find any mechanical data on the pjrc website. I am mostly looking for pad sizes and their x/y position.
I pulled out my calipers to get some rough measurements but I was hoping there might be a datasheet or gerber file.
-
Member

Originally Posted by
jjrh
I am mostly looking for pad sizes and their x/y position.
The pad hole diameter is about 1.0 mm, and the distance between pads is basically 2.54 mm (100 mils).
-

Originally Posted by
raphaelcno
The pad hole diameter is about 1.0 mm, and the distance between pads is basically 2.54 mm (100 mils).
Right, but what about the distance between the through hole pads and the smd ones?
-
Senior Member+
Hi all
Trying to do something for the teensy 3.5 and/or teensy 3.6. I was wondering if anyone has the kicad files for the boards to make life easier.
Thanks
Mike
-

Originally Posted by
mjs513
Hi all
Trying to do something for the teensy 3.5 and/or teensy 3.6. I was wondering if anyone has the kicad files for the boards to make life easier.
Thanks
Mike
Best thing is to just import the gerbers someone posted from OSHPARK and use that as a reference. I never finished making a full on footprint for kicad.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules