Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: Connect Teensy to Windows CE via USB serial

  1. #1
    Junior Member
    Join Date
    Jan 2016
    Posts
    1

    Connect Teensy to Windows CE via USB serial

    Hi!

    I've been using the teensy for pet projects and have loved it. However, I'm having trouble getting it to connect to a WinCE device I have around the house.
    The only thing i need the teensy to do is to send 8byte messages to WinCE. I've had similar requirements when using a terminal on a PC and it works perfectly after installing the driver.
    {Serial.println("ABCDEFGH");}
    However, one is not available for my chosen platform. I've spent some time researching online and have tried the FTDI VCP drivers but that was not enough.
    My question is: Is there a way to setup serial communication between WinCE and Teensy via the USB port or should I use RS232?

    Thank you

  2. #2
    Junior Member ProBoDiS's Avatar
    Join Date
    Jan 2016
    Posts
    8
    Hi! You solved the problem?

  3. #3
    Senior Member
    Join Date
    Nov 2015
    Location
    Wales
    Posts
    579
    The Teensy 3.x uses generic, built in, usb drivers

  4. #4
    Junior Member ProBoDiS's Avatar
    Join Date
    Jan 2016
    Posts
    8
    Xenoamor, maybe you know. What is the difference the HID devices on Windows CE and Windows 7?
    I implemented multitouch on Windows7, but it doesn't work on windowsCE. What could be the reason? Can't find the report descriptors for touch screen Windows CE

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •