Hi, When mounted, is the Vin pin of Teensy 3.2 connected to the +5v of the Octo2811? Thx!
C clfaye Member Feb 1, 2016 #1 Hi, When mounted, is the Vin pin of Teensy 3.2 connected to the +5v of the Octo2811? Thx!
PaulStoffregen Well-known member Feb 2, 2016 #3 Yes. If you need them separate, that's what the VUSB-VIN pads are for on the bottom side of your Teensy. If you're permanently soldering it to the Octo board, you would need to cut that before soldering the pins!
Yes. If you need them separate, that's what the VUSB-VIN pads are for on the bottom side of your Teensy. If you're permanently soldering it to the Octo board, you would need to cut that before soldering the pins!