Teensy USB not recognised.

Status
Not open for further replies.
Dear Paul,
I'm using teensy seens 2 years, a great board. I purchased 30+ 3.1 and 3.2 boards till now but boards life is not more than 2 or 3 days. Previously i thought thwre must be some problem with my hardware but only teensy working in lab is the first teensy 3.1 later npt a sigle teensy worked for me more than 2 days.. most common problem is with usb teensy not recogised/ code 43 or sometimes its not even showing any message on windows. I tried different computers,operating systems I'm harassed troubleshooting those boards please help!
I have more than failed 18 teensy boards.
 
Seems very likely something you're connecting to Teensy is stressing it and causing the chip to blow.

Can you try running a Teensy with only the USB cable connect, no other hardware. Just run the LED blink and allow it to blink for more than 2 days. That can at least confirm if Teensy itself works, without the other stuff connected.
 
Status
Not open for further replies.
Back
Top