im building a custom split kb.
im waiting for my case to come from shapeways will be here monday woot!
so i started playing with the teensy++
tested out the blink programs, and a couple of the button programs
simple non matrix stuff sending pin to ground to send a key.
all good.
then downloaded the tmk firmware.
I know i will have alot of modification, and i think i have a handle on that,
but i just wanted to see the teensy register a keystroke from a matrix
so i compiled one of the prefab keyboard setups tmk comes with.
I looked in matrix.c to find the col pins and row pins.
but when i use a breadboard to connect a valid col & row it doesnt register
any key.
am i missing something obvious?
the only change i made in TMK was to set the correct chip in the makefile
MCU = at90usb1286
and disable NKRO
#NKRO_ENABLE = yes
is something else involved in a matrix keystroke that just completing
the circuit colpin to rowpin?
appending this post to add that i cannot seem to register keystrokes on
any of the matrix based examples in teensyduino like MultiKey or DynamicKeypad
thanks for any help
ClanK
im waiting for my case to come from shapeways will be here monday woot!
so i started playing with the teensy++
tested out the blink programs, and a couple of the button programs
simple non matrix stuff sending pin to ground to send a key.
all good.
then downloaded the tmk firmware.
I know i will have alot of modification, and i think i have a handle on that,
but i just wanted to see the teensy register a keystroke from a matrix
so i compiled one of the prefab keyboard setups tmk comes with.
I looked in matrix.c to find the col pins and row pins.
but when i use a breadboard to connect a valid col & row it doesnt register
any key.
am i missing something obvious?
the only change i made in TMK was to set the correct chip in the makefile
MCU = at90usb1286
and disable NKRO
#NKRO_ENABLE = yes
is something else involved in a matrix keystroke that just completing
the circuit colpin to rowpin?
appending this post to add that i cannot seem to register keystrokes on
any of the matrix based examples in teensyduino like MultiKey or DynamicKeypad
thanks for any help
ClanK
Last edited: